PARALON 2 is our premium grade chlorinated rubber pool enamel. This coating is recommended for refinishing existing chlorinated rubber coatings. It is an attractive, low sheen, rubber-base pool enamel with high water resistance. The soft satin appearance will please the most discriminating pool owner while providing economical protection for the pool surface.
If applying POXOLON 2 to a bare surface, be sure to use the appropriate primer, depending on the surface. When recoating old epoxy, make certain that all glossy surfaces of the old epoxy are dulled down by light sanding. Most important! Prior to the application of any coating follow the three step cleaning process. Use a 9" roller cover with a solvent resistant core. While coating, use firm even strokes with plenty of product in the roller to "squeeze" the coating into the porous surface. This will insure good adhesion. Apply the second coat of POXOLON 2 when the surface is dry enough to walk on without marring the finish. You will get more coverage out of the second coat and it will be quicker to apply. Allow the second coat to cure as recommended on the curing schedule below before filling your pool with water. Two coats of PARALON 2 are required for best results. On unusually porous, bare surfaces like concrete or plaster, a third coat may be necessary.
Coverage: 250 - 275 square feet average per gallon
Two coats of PARALON 2 are required for best results. On unusually porous, bare surfaces like concrete or plaster, a third coat may be necessary.
Coverage: 250 - 275 square feet average per gallon. Available in these attractive colors: White, Blue Ice, Blue Mist, Bikini Blue and Black.